Home » Equipment News » Hydraulic Machinery Guide » What are the installation methods of hydraulic components of hydraulic press

What are the installation methods of hydraulic components of hydraulic press

Posted by: Oil Punch 2021-10-24 Comments Off on What are the installation methods of hydraulic components of hydraulic press

  • ①In order to prevent the air from penetrating into the Hydraulic Press, it should be ensured that all parts of the single-arm hydraulic press should be sealed.
  • ②Generally, before installing the components of the single-arm hydraulic machine, some kerosene should be used for cleaning, and then after some pressure resistance and tightness tests are carried out, it can be installed only after passing the test.
  • ③When installing various valves of a hydraulic machine, you must first pay attention to the direction of their inlet and outlet ports and some parts. Do not install them backwards, otherwise it will cause some failures and accidents. For some two holes that can be opened with two same functions, do not rush to block them after installation.
  • ④Some directional control valves of single-arm hydraulic presses should generally be kept in the horizontal position of the axis.

Please keep the source and address of this article for reprinting:What are the installation methods of hydraulic components of hydraulic press

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machine Wiki,Thanks!^^