Home » page 85

NX1926 open file dialog box preview is missing

2021-09-28 Helpful Articles Comments Off on NX1926 open file dialog box preview is missing

For a long time, after we select the prt file through [File]-[Open], right-click the prt file preview window, as shown below: But friends who have just used the NX1926 version may find such a situatio...

UG NX1926 series installation method

2021-09-28 Helpful Articles Comments Off on UG NX1926 series installation method

If NX6.0~NX1847 series~NX1872~NX1899 series versions are already installed on the computer, please uninstall its license service first, and then install NX1926 as follows to perfectly coexist. Special...

Share the NX post-processing G00 fast-moving alarm code, set a fixed value to not alarm, to prevent the old machine tool from ou...

2021-09-28 Helpful Articles Comments Off on Share the NX post-processing G00 fast-moving alarm code, set a fixed value to not alarm, to prevent the old machine tool from outputting G00 over-cutting

#Put to the knife path to start global mom_operation_name global mom_feed_traversal_value global mom_parent_group_name global mom_group_name   if {$mom_feed_traversal_value == 0} {   if {![i...

Solution of UG NX post-processing output blank

2021-09-28 Helpful Articles Comments Off on Solution of UG NX post-processing output blank

For a long time, the size of the NX output blank can not be solved well. Some read the tool path size (drilling, but can not be solved very well), some default values, and some plug-in coordination (n...