Equipment News

2021-05-26 Equipment News Comments Off on Correct use of CNC end mills

When milling complex workpieces on a milling machining center, the use of CNC end mills should pay attention to the following issues: ...

2021-05-26 Equipment News Comments Off on CNC is not equal to a fool, on the intelligentization of CNC machine tools

Simple operation is often regarded as “dumb”. The advent of digital cameras made the film cameras still holding film feel outdated. Digital cameras were once called point-and-shoot cameras...

2021-05-26 Equipment News Comments Off on Division of NC turning processing stages

The structural shapes of mechanical parts are diverse, but they are all composed of basic surfaces such as plane, outer circle, cylindrical surface, inner cylindrical surface or curved surface, and fo...

2021-05-26 Equipment News Comments Off on The realm of CNC machining

Will use the coordinate system and know the relationship between the processing coordinates and the design coordinates. Familiar with two-dimensional toolpaths, familiar with contour, parallel process...

2021-05-26 Equipment News Comments Off on Trouble Shooting for Loose Coupling of CNC Machine Tool

The feed mechanism of the cnc machine tool is connected with the ball screw by a servo motor or a stepping motor. Generally, it is directly connected by a coupling, connected by a toothed synchronous ...

2021-05-26 Equipment News Comments Off on Methods to determine the causes of failures of CNC machine tools

1. Intuitive method It is to use human senses to pay attention to the phenomenon when the failure occurs and to determine the possible location of the failure. If there are abnormal noises or sparks w...

2021-05-26 Equipment News Comments Off on Precautions for installation and debugging of mechanical parts of CNC machine tools

1. Precautions for equipment debugging of spindle bearings (1) Equipment debugging of single bearing When installing, try to make the amount of misalignment between the positioning bore of the main sh...

2021-05-26 Equipment News Comments Off on Discussion on the transformation of CNC machine tools

As a large country of machine tools, in order to improve the CNC rate of machine tools, it is a good policy to carry out CNC transformation of normal machine tools. Some developed countries such as Ge...

2021-05-26 Equipment News Comments Off on How to repair the failure of indexable tools of CNC machine tools

In order to repair damaged tools efficiently and with high quality, advanced cnc machine tools and precision measuring equipment are indispensable. Old-fashioned hand-operated machine tools are far fr...

2021-05-26 Equipment News Comments Off on Three techniques for clamping workpieces on CNC lathes

Clamping is an important part of the workpiece clamping process. After the workpiece is positioned, the clamping force must be generated by a certain mechanism to press the workpiece on the positionin...

2021-05-26 Equipment News Comments Off on Failure mode, impact and hazard analysis (FMECA)

The failure mode, impact and criticality analysis (FMECA) is aimed at all possible failures of the product, and based on the analysis of the failure mode, determines the impact of each failure mode on...

2021-05-26 Equipment News Comments Off on Failure mode, impact and criticality analysis and fault tree analysis

Reliability analysis technology In the reliability design of cnc machine tools, analysis is an important technical means. Reliability analysis is used to understand the defects in product design schem...

2021-05-26 Equipment News Comments Off on Analysis on the Development of CNC Machine Tool Technology

Analysis of the development of cnc machine tool technology. The machine tool is not only an important equipment for implementing advanced manufacturing technology, but also an important carrier of man...

2021-05-26 Equipment News Comments Off on Reliability Technology Design System of CNC Machine Tool

1  Significance of reliability design As we all know, the reliability of a product is first designed, and secondly manufactured [1]. According to statistics, the contribution rate of the product desig...