2021-05-26 Equipment News Comments Off on What are the types of horizontal five-axis machining centers?
Horizontal machining centers and horizontal five-axis machining centers have rarely been introduced since the establishment of the station, because horizontal machining centers are relatively few in t...
2021-05-26 Equipment News Comments Off on Introduction of horizontal machining center
The main shaft and worktable of the horizontal machining center are parallel machining centers. Its worktable is a square indexing turntable or a CNC turntable. It is suitable for processing box-like ...
2021-05-26 Equipment News Comments Off on Advantages and disadvantages of five-sided machining center structure
Introduction of five-axis machining center The five-sided machining center integrates the functions of a vertical machining center and a horizontal machining center. The five-sided machining center ca...
2021-05-26 Equipment News Comments Off on The structure and characteristics of horizontal CNC machining center
A machining center with parallel spindles is called a horizontal machining center. Generally, a horizontal machining center has 3-5 motion coordinate axes. Common horizontal machining centers are thre...
2021-05-26 Equipment News Comments Off on Rotation speed of electric spindle of high-speed machining center
What is a high-speed machining center? High-speed machining center, as the name implies, high-speed cutting processing, a machining center with a processing speed of 5-10 times that of a conventional ...
2021-05-26 Equipment News Comments Off on The composition of the automatic tool changer of the machining center
The machining center is developed from the basic Cnc Milling Machine, which integrates all the features and functions of the Cnc Milling Machine. The only difference from the CNC Milling Machine is th...
2021-05-26 Equipment News Comments Off on The structure and application of gantry machining center
The gantry machining center is a relatively large machine tool. The smallest gantry machining center has a stroke of more than 1000mm, and it is called the terminator of the large vertical machining c...
2021-05-26 Equipment News Comments Off on Pay attention to four main points when using a horizontal machining center
Environment for installing horizontal machining center The horizontal machining center should be installed in a place far away from the seismic source, not exposed to direct sunlight, no heat radiatio...
2021-05-26 Equipment News Comments Off on The advantages and disadvantages of linear three-axis machining center driven by linear motor
The advantages of linear three-axis machining center driven by linear motor Linear motors drive linear three-axis has the advantages of fast speed, high efficiency, and excellent rigidity. The speed o...
2021-05-26 Equipment News Comments Off on Selection principle of protective cover for CNC lathe
At present, the protection device of the CNC lathe is called the universal protection cover of the CNC lathe. The protection cover of the lathe is widely used and has good performance. The protection ...
2021-05-26 Equipment News Comments Off on Why is the price of the machine tool unknown now?
It is possible that large-scale ships and electronic parts manufacturers will clearly identify the price tag, so that users can better understand the price. In fact, most of the special rules are bred...
2021-05-26 Equipment News Comments Off on The limit setting of CNC lathes should be distinguished
In order to ensure the safe operation of the CNC lathe, both ends of each linear axis are limited. The limit of CNC lathe can be divided into soft limit, hard limit and mechanical hard limit. 1. Hard ...
2021-05-26 Equipment News Comments Off on How to avoid the accident of CNC lathe?
For CNC lathe tool collision accidents, personal accidents or equipment accidents may occur if the safety operation regulations of the lathe are not followed. In the process of processing, because mos...
2021-05-26 Equipment News Comments Off on Technological method when machining thread on CNC lathe
CNC lathes have higher requirements for thread turning than ordinary turning operations. The diamond cutting force is generally higher, and the cutting end radius of the thread insert is smaller and w...
