Home » Sponsored Content » The Certification Marks And Term Explanations Of Industrial Computers In The World

The Certification Marks And Term Explanations Of Industrial Computers In The World

Posted by: Zhou HanPing 2021-11-25 Comments Off on The Certification Marks And Term Explanations Of Industrial Computers In The World

Industrial PCs in China generally have 3C certification, CE certification and CQC certification. The most basic is the 3C certification, which is China’s mandatory electrical and electronic standards. For the certification mark of industrial computer, each national standard is different. I will explain to you what other certifications are available for industrial computers

1. CE certification

Products that use CE certification are becoming more and more widespread. If a product has a CE mark, it represents the requirements of a series of European directives such as product safety, hygiene, environmental protection and consumer protection. If the product can meet the relevant requirements, it can be affixed with the CE mark, but if it does not meet the relevant requirements, the opposite is true. (I personally think that CE is not a certification, but a self-declaration. Generally, this declaration will be made when shipping to Europe)

2. CCC product certification

The so-called 3C certification, this certification was born on May 1, 2002, CCC is the abbreviation of English Chinacompulsorycertification, which means “China Compulsory Certification”. If the product is listed in the “First Batch of Products Subject to Compulsory Product Certification” issued by the General Administration of Quality Supervision, Inspection and Quarantine of the State Administration of Quality Supervision, Inspection and Quarantine and the National Certification and Accreditation Administration Commission, mandatory testing and review of the product must be implemented. If the products listed in the catalogue have not been certified by the designated agency, they cannot be sold, imported or shipped from the factory if they are not certified for labeling in accordance with the regulations. After the implementation of this logo, it replaced the original “Great Wall” logo. The “Great Wall” logo has been invalid since May 1, 2003. It should be noted that the 3C mark is not a quality mark, but a basic safety certification.

3. CQC certification

The China Quality Certification Center (CQC) can obtain the CQC certification, and the products affixed with the CQC certification mark are certified by the national certification body, and the purpose of the certification is to be safe and meet the quality standards of the country’s response.

4. CB certification

The CB system (IEC system for conformity testing and certification of electrical products) is an international system operated by IECEE. The certification bodies of each member country of IECEE test the safety performance of electrical products on the basis of IEC standards. The test results are the CB test report and The CB test certificate is a system that is mutually recognized by the member states of IECEE. The purpose is to reduce international trade barriers due to the need to meet the certification or approval criteria of different countries. IECEE is the abbreviation of the International Electrotechnical Commission’s Electrotechnical Product Qualification Testing and Certification Organization.

5. PCT certification

“Products that want to enter the customs territory of the Russian Federation must obtain a national standard conformity certificate (GOST conformity certificate) issued by the Russian State Standards and Metrology Commission.” The law in Russia stipulates this. Therefore, to enter the Russian market, you must obtain this certification, but our China is very different. We only need to have the Russian PCT standard certification, which is equivalent to getting a pass to enter and exit Russia. (Note: Nothing is perfect, and there are very few things that are not possible, even those with a certificate)

6. PSE certification

Japan’s DENTORL Law (Electrical Device and Material Control Law) stipulates that 498 products must pass safety certification to enter the Japanese market. Among them, 165 types of A products should obtain the diamond-shaped PSE mark, and 333 types of B products should obtain the round PSE mark.

7. TL certification

ETL is the abbreviation of American Electronic Testing Laboratories (ElectricalTestingLaboratories). The ETL laboratory was founded by the American inventor Edison in 1896 and enjoys a high reputation in the United States and the world. Like UL and CSA, ETL can test and issue ETL certification marks in accordance with UL standards or American national standards, and can also issue composite certification marks in accordance with UL standards or American national standards and CSA standards or Canadian standards at the same time. The “us” in the lower right indicates that it is applicable to the United States, the “c” in the lower left indicates that it is applicable to Canada, and both “us” and “c” are applicable to both countries. Any electrical, mechanical and electromechanical products can be tested by EMC to test product performance. As long as the product has the CTL mark affixed, it means that the product has passed the ETL test and passed. Passing ETL means conforming to relevant industry standards.

8. EN certification

EN (European Standard): According to the common obligations of participating countries, the adoption of this EN standard will give legal status to the relevant national standards of a certain member country, or revoke the relevant standards of a certain country that is opposed to it. In other words, the national standards of the member states must be consistent with the EN standards.

9. TUV certification

TUVR-Heinland German Rheinland Technical Supervision Company, which is Germany’s largest certification body for product safety and quality, is a government-recognized testing agency. TUV and FCC certification, CE certification, CSA certification and UL certification are all at the same level, and they are all authoritative. If you want to enter the German market, you must pass TUV certification. Therefore, TUV certification and the above five marks can be seen on various IT products and household appliances.

10. CSA certification

The Canadian Standards Association is abbreviated as CSA, which means Canadian Standards Association. It was established in 1919, and electronic appliances in the North American market must obtain CSA certification. The largest certification body in Canada is CSA, and it is also one of the most famous safety certification bodies in the world. All types of machinery, building materials, electrical appliances, computer equipment, office equipment, environmental protection, medical fire safety, sports, entertainment, etc., can be tested and provide product safety certification.

11. GS certification

The meaning of GS is German “GeprufteSicherheit” (safety has been certified), and it also means “GermanySafety” (German safety). GS certification is a voluntary certification based on the German Product Safety Law (SGS) and tested in accordance with the European Union standard EN or the German industrial standard DIN. It is a recognized German safety certification mark in the European market. With the GS certification mark, it means that it is safe and has passed the test of an independent organization with credibility. It is different from CE. GS does not have legal requirements, but the safety awareness has been deeply rooted in the hearts of ordinary consumers. If there is a GS certification mark, and a GS certification mark, then products with GS certification must be compared. competitive.

12. UL certification

UL is the abbreviation of Underwriter Laboratories Inc, which means the Underwriters Laboratories of the United Kingdom. It was born in 1894, and the most authoritative laboratory in the United States belongs to UL. It is also a private organization, and it also conducts safety tests and appraisals in the world. It is different from other organizations. It is an independent, non-profit, professional organization that conducts experiments for public safety. It adopts scientific testing methods to study and determine whether various materials, devices, products, equipment, buildings, etc. are harmful to life and property; to determine, compile and issue corresponding standards and help reduce and prevent damage to life and property. Loss of information, while carrying out factual research business. In short, it is mainly engaged in product safety certification and operating safety certification business, and its ultimate goal is to obtain products with a fairly safe standard for the market, and to contribute to the guarantee of personal health and property safety. In terms of product safety certification as an effective means to eliminate technical barriers to international trade, UL also plays an active role in promoting the development of international trade.

13. FCC certification

Introduction to FCC Certification FCC (Federal Communications Commission, US Federal Communications Commission) was established by COMMUNICATIONACT in 1934 as an independent agency of the US government and directly responsible to Congress. Many radio application products, communication products and digital products require FCC approval to enter the US market. The United States Federal Communications Commission, FCC, has formulated a series of product quality and performance standards related to the electromagnetic compatibility of electronic equipment and the personal safety of operators. These standards developed by the FCC have been used by many people, and they have also won Few national technology regulatory agencies or similar institutions are certified. Because of this, many electronic products, whether it is the technical manual of that factory, are printed with a certification issued by the FCC that meets a certain standard or declares that they meet a certain standard of the FCC.

14. NF certification

NF is the code name of the French standard, which was implemented in 1938, and its governing body is the French Association for Standardization (AFNOR). The French Association for Standardization (AFNOR) is a non-profit non-profit organization established in 1926 in accordance with the French decree of 1901 and recognized and funded by the government. The association is the core of the French standardization system. NF service certification is a voluntary NF mark certification that confirms that the quality and reliability of a service meets the quality and performance required by French, European and international standards. It involves moving sites, furniture storage units, and travel agencies. , Emergency repair and towing, passenger transportation, personal safety, lifelong education. The tourism service standards established by France are well-known, including hospitality, hotels, transportation and satisfaction surveys.

Link to this article :The Certification Marks And Term Explanations Of Industrial Computers In The World


Sheet metal, Copper Milling, carbon steel,online laser cutting service, 3D printing, precision CNC machining services for heavy equipment, construction, agriculture and hydraulic industries. Suitable for plastics and rare alloys machining. It can turn parts up to 15.7 inches in diameter. Processes include swiss machining,broaching, turning, milling, boring and threading. It also provides metal polishing, painting, surface grinding and shaft straightening services. The production range(include aluminum die casting and zinc die casting) is up to 50,000 pieces. Suitable for screw, coupling, bearing, pump, gearbox housing, drum dryer and rotary feed valve applications.PTJ will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.

Please keep the source and address of this article for reprinting:The Certification Marks And Term Explanations Of Industrial Computers In The World

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machine Wiki,Thanks!^^