Pipe Cnc Cutter

The principle of CNC pipe cutting machine is to cooperate with each other through the air-push-oil type, the electric system controls the movement direction of the air pressure system, and pushes the oil circuit to make a linear reciprocating movement. In the reciprocating movement, the signal detected from the carriage limit is used as the basis , Control and change the movement of the gas and oil circuit, so as to achieve the expected path of the knife.

Product description of pipe cutting machine

The cutting range of the super large ventilation pipe cutting machine is 75-1000mm. The wall thickness of the cutting tube is 3mm. The pipe cutting machine has the functions of light weight, easy to carry and convenient on-site operation. You can use it to cut steel, plastic, copper, cast iron, stainless steel and multilayer pipes.

Use occasion and scope

Housing construction; shipyards; automobile production, industrial pipeline equipment, pulp, paper, chemicals, boilers, water pumping stations, etc.; site fresh water and wastewater systems; municipal heating and cooling systems; urban natural gas pipelines; municipal projects such as hospitals, office buildings, buildings and Large-scale public buildings; medium- and large-scale industries for maintenance and repair work; power stations; installation companies, automatic sprinkler systems in the workshop before assembly, etc.; pipeline repair and treatment.

Advantages and innovations:

• 1. Greatly improve and ease installation safety and fire safety;
• 2. Precision cutting, both sides of the pipe are flat after cutting, which is convenient for connection
• 3. The cutting method is simple and fast, saving a lot of working time;
• 4. Provide a light work method, you can design a cutting plan according to the workplace (on-site);
• 5. High safety, no need to move the pipe by hand when working;
• 6. When cutting, it will not produce sparks and dust to the outside world;
• 7. Full-featured, it can cut various built pipelines of the power system;
• 8. Cutting pipe materials such as: steel, stainless steel, cast iron, copper, plastic, multi-layer pipes can all be cut;
• 9. There are no specific requirements for pipe diameter and working platform;
• 10. Good quality and low price, high cost performance.

Pipe cutting machine detailed introduction

technical parameter

• Voltage: 110-230V (50-60Hz)
• Power: 1200W
• Speed: 1600-3500 rpm
• Saw blade center hole: 62mm
• Saw blade diameter: 140mm
• Use range: 15-170mm
• Maximum pipe wall: Steel 8mm
• Stainless steel 6mm
• Plastic 14mm
• Weight: 5.7KG

technical parameter

• Voltage: 220-240V (50-60Hz)
• Power: 1010W
• Speed: 4000 rpm
• Saw blade center hole: 62mm
• Saw blade diameter: 155mm
• Use range: 75-1000mm
• Maximum pipe wall: 3mm

Features

• Weight: 6.0KG
• Super large ventilation duct cutting machine
• Large cutting range: 75-1000mm
• Cutting pipe wall thickness: 3mm

Working principle of pipe cutting machine

The principle is that through the cooperation of computer and hydraulic pressure, the electric system controls the direction of the oil circuit of the hydraulic system to push the carriage to make a straight and reciprocating movement. The microcomputer will follow the tool path programmed by the user. During the reciprocating motion, the signal detected from the carriage limit is used as the basis to control and change the oil circuit movement, so as to achieve the expected tool path. When buying a pipe cnc cutter, you should also understand its purpose: this machine is widely used in the handle industry and other automatic pipe cutting and chamfering of stainless steel pipes. Can be placed ∮25 or less, 6 meters in length of stainless steel pipes and seamless steel pipes. For the processes of automatic feeding, cutting and chamfering, one person manages multiple machines, reducing labor intensity and saving personnel.

Operating procedures

• 1. Check before starting
• 1.1 Check whether the saw blade is in good condition, and replace it if there are cuts or cracks.
• 1.2 According to the specifications of the high-pressure hose, replace the corresponding positioning pin and guide sleeve.
• 2. Operation steps
• 2.1 Switch on the power supply and start the motor.
• 2.2 Pass the cut high-pressure hose into the replaced guide sleeve, pull the knife-shaped handle to drive the hose into the saw blade, the hose is cut, and when the slide plate is reset, it will be pulled back to its original position by two tension springs.
• 2.3 Insert the inner hole of the cut rubber tube into the positioning pin shaft. When the saw blade rotates, make a slit at the place where the rubber is to be stripped to ensure a good glue breaking effect when the rubber tube is stripped.
• 2.4 After working, the power must be cut off.

The automatic pipe cutting machine can automatically clamp the material, feed the knife, feed the material, set the size, stop at a fixed number, and measure the work. The main circuit of the machine adopts PLC programmable logic controller to work. Automatic feeding, clamping and cutting system, accurate and fast feeding, cutting 10-50 times per minute. The counter can set the number of cutting times, and it will stop automatically after cutting. There is no need for manual operation at all, higher mechatronics, and even one person can operate multiple machines, reducing the number of employees. The total counter can count the workload records of a day. The total pressure, front, back, and pressure can be adjusted steplessly to ensure that the workpiece is not pinched and deformed. The servo pipe cutting machine is used to ensure the accuracy of the pipe length within plus or minus 0.05mm (the error mainly occurs on the steel pipe and the tool ), the incision is glossy and has no burrs.

Type Of Pipe Cutter

Manual

European-style high-strength machine head, equipped with high-efficiency worm and worm gear transmission, makes the aluminum cutting speed high, noiseless and no burrs. The knife feed adopts manual mode, the head can rotate 45° from left to right, the angle is clearly marked, and the 45°-90-45° reference column is added to make the adjustment easier. It is equipped with manual two-way clamps, automatic cooling system and hand Debug the gear ruler.

pneumatic

The double-sided bidirectional clamp of the pneumatic pipe cutting machine makes the workpiece stable, and the cutting surface is smooth and free of burrs. Low noise and low pollution during sawing. The cutting is accurate and the speed exceeds that of band saws and bow saws. At the same time, the cutting surface is smooth and does not generate heat, saving secondary processing. The machine head can be adjusted left and right for oblique cutting or slot milling. The angle is accurate and the pipe cut is perfect. Circulating cooling system, with extra large capacity oil storage barrel, to ensure the life of the saw blade, and the cutting surface is smooth.

Technical parameters of pipe cutting machine

technical parameter

• Voltage: 220-240V (50-60Hz)
• Power: 1010W
• Speed: 4000 rpm
• Saw blade center hole: 62mm
• Saw blade diameter: 155mm
• Use range: 75-1000mm
• Maximum pipe wall: 3mm

Features

• Weight: 6.0KG
• Super large ventilation duct cutting machine
• Large cutting range: 75-1000mm cutting pipe wall thickness: 3mm

The world is full of things, and the existence of nothing is immutable. my country’s pipe cutting machine industry is no exception. It is either progressing or lagging behind. So how to improve the development of this industry? This has become a common concern among pipe cutting machine manufacturers.

Nowadays, the upgrading of paper tube machines, web slitting machines, tube cutting machines, and paper tube machine equipment is the first to be Japan, earning a lot of dollars in this field. The Southeast Asian Four Little Dragons also followed Japan, and they have performed well in the manufacturing of packaging machinery equipment and production lines. In the European Community, the pace of upgrading of packaging machinery and production lines in Italy is much faster than that of other member states.

The method of upgrading is to replace some parts, components or key components and key technologies, so as to achieve the purpose of replacing a unit, so that the production capacity, performance, efficiency, model and assembly methods of the original packaging machinery equipment or production line can be achieved. Get updated. In this way, most of the components and parts of the unit are reused, which not only improves the value of the equipment, but also saves raw materials and a large amount of labor, and reduces the cost.

This development trend shows that paper tube packaging equipment, paper tube machines, web slitting machines, pipe cutting machines, paper tube machine equipment, spiral paper tube machines are becoming more and more standardized, serialized, integrated, assembled, Online model development. Civil and military high technology will also enter the entire field of packaging machinery and equipment more and more widely. Fierce market competition will undoubtedly accelerate the pace of upgrading and technological transformation of paper tube packaging equipment in all walks of life.

Precautions

• 1. The spindle speed change must be carried out after stopping. The gears must be fully meshed when shifting. When the machine tool is found to be abnormal, stop and check immediately.
• 2. Before cutting, adjust the cutter and clamp the work object. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed, and work can only be carried out after the sequence of clamping, unclamping, forward and backward test runs.
• 3. When the machine tool is rotating, no part of the human body should touch the transmission parts. When operating, tie the cuffs, and it is strictly forbidden to work with gloves. The human head should deviate from the cutting direction.
• 4. When changing tools, measuring workpieces, lubricating, and cleaning pipe heads, the machine must be stopped.
• 5. When cutting the tube head, prevent the tube head from flying out and hurting people.
• 6. When the long material pipe is put into the material rack and the bundled lead wire is loosened, measures should be taken to prevent the pipe from rolling, impacting, and crushing people.
• 7. When using the grinding wheel pipe cutting machine, you should check in advance whether the grinding wheel is damaged, cracked, damp, and the power cord is reliable.
• 8. The dust removal device of the pipe cutting machine should be intact before cutting.
• 9. No one should stand in the direction of the workpiece in and out of the material.