According to reports, the root cause of part defects is that the melt conveyed by the hot runner system is too hot. However, the true root is beyond my imagination. The set point temperature of the te...
Selection of machining method selection principle The formulation of machining process regulations is an important procedure document that must be implemented for large mechanical machining plants. In...
The machining accuracy of machining is the degree of conformity between the actual size, shape and position of the three geometric parameters of the workpiece surface after machining and the ideal geo...
From automobile manufacturing to shipbuilding and trailer manufacturing, aluminum has always been an increasingly popular material, mainly due to its high strength-to-weight ratio and corrosion resist...
1. The lightweight of automobiles is overwhelming Reducing the weight of the car is what people have been pursuing and exploring. Lighter cars can improve vehicle performance on the one hand, and on t...
Recently, there is a word that has become popular, which is “Metaverse” Metaverse, this English word is composed of Meta and Verse, Meta means transcendence, and verse means universe. Take...
According to reports, the root cause of part defects is that the melt conveyed by the hot runner system is too hot. However, the true root is beyond my imagination. The set point temperature of the te...
With the rapid development of sheet metal processing technology, the processing technology is also changing with each passing day, bringing many revolutionary concepts to sheet metal processing. As a ...
When performing machining, the selection of blanks not only affects the economics of blank manufacturing, but also affects the economics of machining. Therefore, when selecting blanks, both mechanical...
The dust produced in the grinding process is potentially dangerous, and it may cause people to slip and fall, and it may also cause combustible metal dust to catch fire and explode. To avoid this, met...
Since the beginning of this year, the price of non-ferrous metals has risen sharply. The most important factor is that the previous price has dropped too much, and the median cost has generally fallen...
The limitation of hexavalent chromium prevents the use of flux cored wire (FCAW) in most places, and gas metal arc welding (GMAW) performs poorly in both directions of groove welding. So, what should ...
When performing machining, we should not only understand the general technical requirements of machining of various workpieces, but also how to define various special requirements of machining, and ho...
With the development of science and technology, there are more and more cutting methods, such as: laser cutting, water cutting, plasma cutting, wire cutting…what is the difference between them? ...