In some cases, the CNC turret punch press needs to be repaired, so what issues should be paid attention to when repairing the CNC turret punch press?
- 1) Clean the punch and its surroundings before maintenance; after the maintenance is completed, clean up the oil spills when oiling the punch and its surroundings. And the maintenance tools must not be left in the equipment.
- 2) Oil may spill when removing the hydraulic equipment, so prepare the chassis and wipes.
- 3) High-temperature equipment such as motors, valves, heaters, etc., should be operated after cutting off the power supply and cooling for a period of time.
- 4) Except for maintenance and inspection, do not open the door of the CNC control panel at will. The ingress of dust and moisture will cause the press to malfunction.
- 5) It is not allowed to stand on the wire rails and the teeth. Contamination and scratches will cause damage to the punch.
- 6) During maintenance and inspection, the punch clamp must not be installed, otherwise it may cause personal accidents.
Please keep the source and address of this article for reprinting：What problems should be paid attention to when repairing CNC turret punch presses?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machine Wiki，Thanks！^^