Home » Helpful Articles » Share UG CNC lathe programming grooving skills

Share UG CNC lathe programming grooving skills

Posted by: Yoyokuo 2021-09-27 Comments Off on Share UG CNC lathe programming grooving skills

There is a problem with UG, and I often search for solutions on the Internet. I got the help of many seniors in the industry, especially the advice of Mr. Ye. Today I also write about the experience of UG grooving, a master detour. The relevant parameters can be changed in the program or in the default template, once and for all. The template folder “D:\Program Files\Siemens\NX 10.0\MACH\resource\template_part\metric\turning.prt” opens the cutting or grooving process.

  • 1. Add a chamfer: cutting parameter/corner/chamfer/distance 0.2.
  • 2. Raise the tool during cutting and cut intermittently: cutting parameters/chip control/constant safety setting/constant increment 1.2/safe distance 0.2.
  • 3. Feed fast retreat: feed rate and speed/retract 800%/movement 400%.
  • 4. Prevent the knife from digging into the concave surface, similar to omitting the transformation area: cutting parameters/strategy/tool safety angle 2 degrees (the tool side angle is 2 degrees by default).

Just press the above settings. UG CNC lathe programming grooving skills, let me share with you.

Please keep the source and address of this article for reprinting:Share UG CNC lathe programming grooving skills

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machine Wiki,Thanks!^^