The following 5 points shall be noted for the device of servo Hydraulic Press cylinder
- 1. All parts must be cleaned and free of burrs on the surface to prevent scratching the sealing ring.
- 2. When installing the sealing ring, pay attention to whether the sealing ring is damaged and whether the lip is missing.
- 3. The cylinder must be cleaned and carefully observed for any strain. If there is any strain, it is necessary to repair it.
- 4. Prevent scrap iron from entering the cylinder during the process of the device, and wear gloves when necessary.
- 5. When the piston rod enters the cylinder barrel, it must be lubricated and kept smooth.
Please keep the source and address of this article for reprinting：Precautions for oil cylinder device of servo hydraulic press
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machine Wiki，Thanks！^^