After receiving our industrial computer, many customers will conduct a systematic test on it, such as running a program, turning the CPU to the maximum and the memory to the maximum, they will find that the external casing of the industrial computer will be very hot. What is the reason for the high heat output of the industrial computer?
First of all, we start with the structure of the industrial computer. Our industrial computer is of all-aluminum alloy structure and is fully sealed. There is no internal fan to dissipate heat. Therefore, it is normal that there is some heat outside the housing of the industrial computer. Prove that the CPU or other electronic materials can conduct heat out of the body during work, thereby protecting the normal operation of the industrial computer. In addition, the following points may cause excessive heat generation of the industrial computer, such as:
1. The heat of the high-performance processor is too high
At present, many industrial computers with good airtightness use low-power processors, but for some special customer applications, the processors use high-end processors, such as Intel Core i5 or i7 processors, which consume more power and produce A lot of heat. If you are using an advanced CPU, the heat will be higher. We have already considered the heat dissipation performance before R&D, and will also make corresponding temperature tests before leaving the factory, so you don’t need to worry about it.
2. In a sealed working environment
Since the inside of the industrial computer is a fully sealed structure, heat will be discharged out of the body during operation, but if the industrial computer is installed in a fully sealed machine environment without any air circulation outside, the temperature of the environment will continue to rise. This will affect the normal operation of the industrial computer. We recommend that customers ensure a certain airflow when installing the industrial computer. For example, it is best to add a small fan when installed in a cabinet.
In general, as long as the heat generated by our industrial computer products can be radiated to the body normally, and there is a certain air flow in the environment, there is no need to worry too much about the case of the industrial computer being very hot.
Link to this article :Our Industrial Computer Sometimes Very Hot In Use?
Sheet metal, Copper Milling, carbon steel,online laser cutting service, 3D printing, precision CNC machining services for heavy equipment, construction, agriculture and hydraulic industries. Suitable for plastics and rare alloys machining. It can turn parts up to 15.7 inches in diameter. Processes include swiss machining,broaching, turning, milling, boring and threading. It also provides metal polishing, painting, surface grinding and shaft straightening services. The production range(include aluminum die casting and zinc die casting) is up to 50,000 pieces. Suitable for screw, coupling, bearing, pump, gearbox housing, drum dryer and rotary feed valve applications.PTJ will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.
Please keep the source and address of this article for reprinting：Our Industrial Computer Sometimes Very Hot In Use?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machine Wiki，Thanks！^^